Clear Spantree Statistics - 3Com 3CRWX120695A Command Reference Manual

clear spantree
statistics
History — Introduced in MSS Version 3.0.
Usage — MSS does not change a port's priority for VLANs other than the
one(s) you specify.
Examples — The following command resets the STP priority for port 2 in
VLAN avocado:
WX4400# clear spantree portvlanpri 2 vlan avocado
success: change accepted.
See Also
"clear spantree portpri" on page 317
"display spantree" on page 320
"set spantree portpri" on page 337
"set spantree portvlanpri" on page 339
Clears STP statistics counters for a network port or ports and resets them
to 0.
Syntax —
clear spantree statistics port-list [vlan vlan-id]
— List of ports. Statistics counters are reset on the
port-list
specified ports.
— VLAN name or number. MSS resets statistics
vlan vlan-id
counters for only the specified VLAN.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command clears STP statistics counters for
ports 1, 3, and 5 through 8, for all VLANs:
WX1200# clear spantree statistics 1,3,5-8
success: change accepted.
See Also
"display spantree statistics" on page 325

clear spantree statistics

319