Set Spantree Fwddelay; Set Spantree Hello - 3Com 3CRWX120695A Command Reference Manual

Wireless lan mobility system wireless lan switch and controller
Hide thumbs Also See for 3CRWX120695A:
Table of Contents

Advertisement

334
C
10: STP C
HAPTER
set spantree
fwddelay

set spantree hello

OMMANDS
See Also
"display spantree backbonefast" on page 322
Changes the period of time after a topology change that a WX switch
which is not the root bridge waits to begin forwarding Layer 2 traffic on
one or all of its configured VLANs. (The root bridge always forwards
traffic.)
Syntax —
set spantree fwddelay delay {all | vlan vlan-id}
— Delay value. You can specify from 4 through 30 seconds.
delay
— Changes the forwarding delay on all VLANs.
all
vlan vlan-id
delay on only the specified VLAN.
Defaults — The default forwarding delay is 15 seconds.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command changes the forwarding delay on
VLAN pink to 20 seconds:
WX4400# set spantree fwddelay 20 vlan pink
success: change accepted.
See Also
"display spantree" on page 320
Changes the interval between STP hello messages sent by a wireless LAN
switch when operating as the root bridge, on one or all of its configured
VLANs.
Syntax —
set spantree hello interval {all | vlan vlan-id}
— Interval value. You can specify from 1 through 10
interval
seconds.
— Changes the interval on all VLANs.
all
— VLAN name or number. MSS changes the forwarding

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3crwx440095a

Table of Contents