Set Authentication Admin - 3Com 3CRWX120695A Command Reference Manual

set authentication
admin
Examples — The following command issues stop-only records to the
RADIUS server group sg2 for network user Nin, who is authenticated by
802.1X:
WX4400# set accounting dot1x Nin stop-only sg2
success: change accepted.
See Also
"clear accounting" on page 165
"display accounting statistics" on page 182
Configures authentication and defines where it is performed for specified
users with administrative access through Telnet or Web Manager.
Syntax —

set authentication admin

user-glob method1 [method2] [method3] [method4]
— Single user or set of users with administrative access
user-glob
over the network through Telnet or Web Manager.
Specify a username, use the double-asterisk wildcard character (**) to
specify all usernames, or use the single-asterisk wildcard character (*)
to specify a set of usernames up to or following the first delimiter
character—either an at sign (@) or a period (.). (For details, see "User
Globs" on page 24.)
method1, method2, method3, method4
methods that MSS uses to handle authentication. Specify one or more
of the following methods in priority order. MSS applies multiple
methods in the order you enter them.
A method can be one of the following:
— Uses the local database of usernames and user groups
local
on the WX switch for authentication.
server-group-name
for authentication. You can enter up to four names of existing
RADIUS server groups as methods.
— For users with administrative access only, MSS performs no
none
authentication, but prompts for a username and password and
accepts any combination of entries, including blanks.
set authentication admin
— At least one of up to four
— Uses the defined group of RADIUS servers
189