Cli Features; Online Help - 3Com 4500 Configuration Manual

View
RADIUS
scheme view
ISP domain
view
Remote-ping
test group
view
PoE profile
view
Detected
group view
QinQ view
The shortcut key <Ctrl+Z> is equivalent to the return command.

CLI Features

Online Help

When configuring the switch, you can use the online help to get related help information. The CLI
provides two types of online help: complete and partial.
Complete online help
1) Enter a question mark (?) in any view on your terminal to display all the commands available in the
view and their brief descriptions. The following takes user view as an example.
<Sysname> ?
User view commands:
backup
boot
Available
Prompt example
operation
Configure RADIUS
[Sysname-radius-1
scheme
]
parameters
Configure ISP [Sysname-isp-aaa
domain parameters 123.net]
Configure
[Sysname-remote-
remote-ping test
ping-a123-a123]
group parameters
Configure PoE [Sysname-poe-pro
profile parameters file-a123]
Configure detected [Sysname-detect-g
group parameters roup-1]
Configure QinQ [Sysname-Etherne
parameters t1/0/1-vid-20]
Backup current configuration
Set boot option
Enter method
Execute the radius
scheme command
in system view.
Execute the
domain command
in system view.
Execute the
remote-ping
command in
system view.
Execute the
poe-profile
command in
system view.
Execute the
detect-group
command in
system view.
Execute the
vlan-vpn vid
command in
Ethernet port view.
The vlan-vpn
enable command
should be first
executed.
5-8
Quit method
Execute the
quit command
to return to
Ethernet port
view.
Execute the
return
command to
return to user
view.