220
C
7: AAA C
HAPTER
set web-aaa
OMMANDS
attribute-name value
using to authorize all users in the group for a particular service or
session characteristic. For a list of authorization attributes and values
that you can assign to users, see Table 40 on page 209.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — To change the value of an attribute, enter set usergroup attr
with the new value. To delete an attribute, use clear usergroup attr.
To add a user to a group, user the command set user group.
Examples — The following command adds the user group cardiology to
the local database and assigns all the group members to VLAN crimson:
WX4400# set usergroup cardiology vlan-name crimson
success: change accepted.
See Also
"clear usergroup" on page 178
"clear usergroup attr" on page 179
"display aaa" on page 180
Globally enables or disables Web AAA on an WX switch.
Syntax —
set web-aaa {enable | disable}
— Enables Web AAA on the switch.
enable
— Disables Web AAA on the switch.
disable
Defaults — Enabled.
Access — Enabled.
History — Introduced in MSS Version 3.0.
— Name and value of an attribute you are