set igmp
Table 69 Output of display igmp statistics (continued)
Field
Description
Topology
Number of Layer 2 topology change notifications received by the
notifications
WX.
In the current software version, the value in this field is always 0.
Packets with
Number of multicast packets received with an unrecognized
unknown
multicast type.
IGMP type
Packets with
Number of packets with an invalid length.
bad length
Packets with
Number of packets with an invalid IGMP checksum value.
bad IGMP
checksum
Packets
Number of multicast packets dropped by the WX.
dropped
See Also
"clear igmp statistics" on page 344
Disables or reenables IGMP snooping on one VLAN or all VLANs on a
wireless LAN switch.
Syntax —
set igmp {enable | disable} [vlan vlan-id]
— Enables IGMP snooping.
enable
— Disables IGMP snooping.
disable
— VLAN name or number. If you do not specify a
vlan vlan-id
VLAN, IGMP snooping is disabled or reenabled on all VLANs.
History — Introduced in MSS Version 3.0.
Examples — The following command disables IGMP snooping on VLAN
orange:
WX1200# set igmp disable vlan orange
success: change accepted
See Also
"set igmp rv" on page 364
set igmp
355
Need help?
Do you have a question about the 3CRWX120695A and is the answer not in the manual?