Set Trace Dot1X; Set Trace Sm - 3Com 3CRWX120695A Command Reference Manual

486 C 19: T
HAPTER RACE

set trace dot1x

set trace sm

C
OMMANDS
See Also
"clear trace" on page 482
"display trace" on page 483
Traces 802.1X sessions.
Syntax —
set trace dot1x
[ ] [
user username
mac-addr mac-address
address, using colons to separate the octets (for example,
00:11:22:aa:bb:cc).
port port-num
user username
80 alphanumeric characters with no spaces.
level level
the output. You can set the level with an integer from 1 to 10, where
level 10 provides the most information. Levels 1 through 5 provide
user-readable information. If you do not specify a level, level 5 is the
default.
Defaults — The default trace level is 5.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command starts a trace for the 802.1X
sessions for MAC address 00:01:02:03:04:05:
WX4400# set trace dot1x mac-addr 00:01:02:03:04:05:
success: change accepted.
See Also
"clear trace" on page 482
"display trace" on page 483
Traces session manager activity.
[
mac-addr mac-address
]
level level
— Traces a MAC address. Specify a MAC
— Traces on a WX port number.
— Traces a user. Specify a username of up to
— Determines the quantity of information included in
] [ ]
port port-num