3Com 3CRWX120695A Command Reference Manual page 188

188 C 7: AAA C
HAPTER OMMANDS
Specify a username, use the double-asterisk wildcard character (**) to
specify all usernames, or use the single-asterisk wildcard character (*)
to specify a set of usernames up to or following the first delimiter
character — either an at sign (@) or a period (.). (For details, see "User
Globs" on page 24.)
This option does not apply if mac is specified. For mac, specify a
mac-addr-glob. (See "MAC Address Globs" on page 25.)
mac-addr-glob
address. Specify a MAC address, or use the wildcard (*) character to
specify a set of MAC addresses. (For details, see "MAC Address
Globs" on page 25.)
This option applies only when mac is specified.
start-stop — Sends accounting records at the start and end of a
network session.
stop-only — Sends accounting records only at the end of a network
session.
method1, method2, method3, method4
methods that MSS uses to process accounting records. Specify one or
more of the following methods in priority order. If the first method
does not succeed, MSS tries the second method, and so on.
A method can be one of the following:
— Stores accounting records in the local database on the
local
WX switch. When the local accounting storage space is full, MSS
overwrites older records with new ones.
server-group-name
Remote Authentication Dial-In User Service (RADIUS) servers. You
can also enter the names of existing RADIUS server groups as
methods.
Defaults — Accounting is disabled for all users by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — For network users with start-stop accounting whose records
are sent to a RADIUS server, MSS sends interim updates to the RADIUS
server when the user roams.
— A single user or set of users with access via a MAC
— Stores accounting records on one or more
— At least one of up to four