Port Commands; Commands By Usage - 3Com 3CRWX120695A Command Reference Manual

4
Commands by
Usage
P C
ORT OMMANDS
Use port commands to configure and manage individual ports and
load-sharing port groups.
This chapter presents port commands alphabetically. Use Table 9 to locate
commands in this chapter based on their use.
Table 9 Port Commands by Usage
Type
Port Type
Name
State
Gigabit Interface Type "display port preference" on page 65
Speed
Autonegotiation
PoE
SNMP
Command
"set port type ap" on page 82
"set dap" on page 73
"set port type wired-auth" on page 86
"clear port type" on page 61
"clear dap" on page 58
"set port name" on page 78
"clear port name" on page 59
"set port" on page 76
"reset port" on page 73
"display port status" on page 66
"set port preference" on page 80
"clear port preference" on page 60
"set port speed" on page 81
"set port negotiation" on page 78
"set port poe" on page 79
"display port poe" on page 64
"set port trap" on page 81