3Com 3CRWX120695A Command Reference Manual page 456

456 C 17: RF D
HAPTER
WX1200# display rfdetect mobility-domain
Total number of entries: 3
BSSID
> Radio Mac
---------------------- --------------- ------------- ---- -----------
00:00:00:01:7a:80
> 00:0b:0e:00:0a:a3
> 00:0b:0e:00:04:c8
> 00:0b:0e:00:0a:6b
00:00:00:01:d1:41
> 00:0b:0e:00:04:c8
> 00:0b:0e:00:0a:a3
00:00:00:01:d9:41
> 00:0b:0e:00:0a:a3
> 00:0b:0e:00:0a:6b
C
ETECTION OMMANDS
Examples — The following example displays information about the
BSSIDs detected in the Mobility Domain managed by the seed switch:
WX-IPaddr
10.8.121.101
10.8.121.101
10.8.121.102
10.8.121.101
10.8.121.101
10.8.121.101
10.8.121.102
Table 87 describes the fields in this display.
Table 87 display rfdetect mobility-domain Output
Field
BSSID > Radio MAC
WX-IPaddr
Port/Radio/Channel
RSSI
SSID
Port/Radio
/Channel
5/2/60
4/2/60
3/2/60
4/2/36
5/2/36
5/2/52
3/2/52
Description
MAC address of the SSID advertised by the detected device,
and the MAC addresses of the radios that detected the
BSSID.
The BSSID is listed first. The MAC addresses of the 3Com
radios that detected the BSSID are listed underneath the
BSSID.
If a 3Com radio is supporting more than one SSID, each of
the corresponding BSSIDs is listed separately.
System IP address of the WX switch that is managing the
MAP that detected the rogue.
Port number, radio number, and channel number of the
radio that detected the rogue. For a Distributed MAP, the
connection number is labeled dap. (This stands for
distributed ap.)
Received signal strength indication (RSSI) — the strength of
the RF signal detected by the MAP radio, in decibels referred
to 1 milliwatt (dBm).
Service set identifier (SSID) associated with the BSSID.
RSSI SSID
-34 wla
-46 wla
-32 wlay
-37 wla
-33 wla
-66 public
-54 public