3Com 3CRWX120695A Command Reference Manual page 160

160 C 6: IP S
HAPTER ERVICES
WX4400# traceroute server1
traceroute to server1.example.com (192.168.22.7), 30 hops max, 38 byte packets
1 engineering-1.example.com (192.168.192.206) 2 ms 1 ms 1 ms
2 engineering-2.example.com (192.168.196.204) 2 ms 3 ms 2 ms
3 gateway_a.example.com (192.168.1.201) 6 ms 3 ms 3 ms
4 server1.example.com (192.168.22.7) 3 ms * 2 ms
C
OMMANDS
— Maximum number of hops, which can be from 1 through
ttl hops
255.
— Probe wait in milliseconds. You can specify from 1 through
wait ms
100,000.
Defaults
dnf — Disabled
no-dns — Disabled
port — 33434
queries — 3
size — 38
ttl — 30
wait — 5000
Access — All.
History — Introduced in MSS Version 3.0.
Usage — To stop a traceroute command that is in progress, press
+
Ctrl C.
Examples — The following example traces the route to host server1:
The first row of the display indicates the target host, the maximum
number of hops, and the packet size. Each numbered row displays
information about one hop. The rows are displayed in the order in which
the hops occur, beginning with the hop closest to the WX switch.
The row for a hop lists the total time in milliseconds for each ICMP packet
to reach the router or host, plus the time for the ICMP Time Exceeded
message to return to the host.
An exclamation point (!) following any of these values indicates that the
Port Unreachable message returned by the destination has a maximum