Display Service-Profile - 3Com 3CRWX120695A Command Reference Manual

display
service-profile
See Also
"set radio-profile 11g-only" on page 275
"set radio-profile auto-tune channel-config" on page 276
"set radio-profile auto-tune channel-holddown" on page 277
"set radio-profile auto-tune channel-interval" on page 278
"set radio-profile auto-tune power-backoff- timer" on page 279
"set radio-profile auto-tune power-config" on page 280
"set radio-profile auto-tune power-interval" on page 281
"set radio-profile beacon-interval" on page 282
"set radio-profile dtim-interval" on page 283
"set radio-profile frag-threshold" on page 283
"set radio-profile long-retry" on page 284
"set radio-profile max-rx-lifetime" on page 285
"set radio-profile max-tx-lifetime" on page 286
"set radio-profile mode" on page 287
"set radio-profile preamble-length" on page 289
"set radio-profile rts-threshold" on page 290
"set radio-profile service-profile" on page 291
"set radio-profile short-retry" on page 294
Displays service profile information.
Syntax —
display service-profile {name | ?}
— Displays information about the named service profile.
name
— Displays a list of service profiles.
?
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command displays information for service
profile wpa_clients:

display service-profile

257