3Com 3CRWX120695A Command Reference Manual page 394

394 C 13: C
HAPTER RYPTOGRAPHY
C
OMMANDS
After you type the command, you are prompted for the following
variables:
Country Name string
country in which the WX switch is operating, in 2 alphanumeric
characters with no spaces.
State Name string
name of the state, in 2 alphanumeric characters with no spaces.
Locality Name string
in up to 80 alphanumeric characters with no spaces.
Organizational Name string
organization, in up to 80 alphanumeric characters with no spaces.
Organizational Unit string
organizational unit, in up to 80 alphanumeric characters with no
spaces.
Common Name string
up to 80 alphanumeric characters with no spaces. Use a fully qualified
name if such names are supported on your network. This field is
required.
Email Address string
up to 80 alphanumeric characters with no spaces.
Unstructured Name string
80 alphanumeric characters with no spaces.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — To use this command, you must already have generated a
public-private encryption key pair with the crypto generate key
command.
Enter crypto generate request admin, crypto generate request eap,
or crypto generate request webaaa and press Enter. When you are
prompted, type the identifying values in the fields, or press Enter if the
field is optional. You must enter a common name for the WX switch.
This command outputs a PKCS #10 text string in Privacy-Enhanced Mail
protocol (PEM) format that you paste to another location for submission
— (Optional) Specify the abbreviation for the
— (Optional) Specify the abbreviation for the
— (Optional) Specify the name of the locality,
— (Optional) Specify the name of the
— (Optional) Specify the name of the
— Specify a unique name for the WX switch, in
— (Optional) Specify your email address, in
— (Optional) Specify any name, in up to