Set {Ap | Dap} Radio Tx-Power - 3Com 3CRWX120695A Command Reference Manual

Wireless lan mobility system wireless lan switch and controller
Hide thumbs Also See for 3CRWX120695A:
Table of Contents

Advertisement

set {ap | dap} radio
tx-power
— Disables radios on the specified ports.
mode disable
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — When you create a new profile, the radio parameters in the
profile are set to their factory default values.
To enable or disable all radios that use a specific radio profile, use set
radio-profile.
Examples — The following command enables radio 1 on ports 3
through 6 assigned to radio profile rp1:
WX1200# set ap 3-6 radio 1 radio-profile rp1 mode enable
success: change accepted.
See Also
"clear {ap | dap} radio" on page 232
"display radio-profile" on page 254
"set {ap | dap} radio mode" on page 271
"set radio-profile mode" on page 287
Sets an MAP radio's transmit power.
Syntax —
set {ap port-list | dap dap-num} radio {1 | 2}
tx-power power-level
— List of ports connected to the MAP access points on
ap port-list
which to set the transmit power.
— Number of a Distributed MAP on which to set the
dap dap-num
transmit power.
— Radio 1 of the MAP.
radio 1
— Radio 2 of the MAP. (This option does not apply to
radio 2
single-radio models.)

set {ap | dap} radio tx-power

273

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3crwx440095a

Table of Contents