Set Server Group - 3Com 3CRWX120695A Command Reference Manual

set server group

timeout interval of 30 seconds, two transmit attempts, 5 minutes of dead
time, and a key string of keys4u, type the following command:
WX1200# set radius server RS42 address 198.162.1.1 timeout 30
retransmit 2 deadtime 5 key keys4U
See Also
"display aaa" on page 180
"set authentication admin" on page 189
"set authentication console" on page 191
"set authentication dot1x" on page 193
"set authentication last-resort" on page 197
"set authentication mac" on page 199
"set authentication web" on page 201
"set radius" on page 407
"set server group" on page 411
Configures a group of one to four RADIUS servers.
Syntax —
set server group group-name members server-name1
[server-name2] [server-name3] [server-name4]
— Server group name of up to 32 characters, with no
group-name
spaces or tabs.
members server-name1, server-name2, server-name3,
— The names of one or more configured RADIUS
server-name4
servers. You can enter up to four server names.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — You must assign all group members simultaneously, as shown
in the example. To enable load balancing, use set server group
load-balance enable.
set server group 411