Set Igmp Mrsol Mrsi - 3Com 3CRWX120695A Command Reference Manual

358 C 11: IGMP S
HAPTER

set igmp mrsol mrsi

C
NOOPING OMMANDS
History — Introduced in MSS Version 3.0.
Examples — The following command enables multicast router
solicitation on VLAN orange:
WX1200# set igmp mrsol enable vlan orange
success: change accepted
See Also
"set igmp mrsol mrsi" on page 358
Changes the interval between multicast router solicitations by a WX on
one VLAN or all VLANs.
Syntax —
set igmp mrsol mrsi seconds [vlan vlan-id]
— Number of seconds between multicast router solicitations.
seconds
You can specify a value from 1 through 65,535.
vlan vlan-id
VLAN, MSS changes the multicast router solicitation interval for all
VLANs.
Defaults — The interval between multicast router solicitations is 30
seconds by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — You cannot add MAP access ports or wired authentication
ports as static multicast ports. However, MSS can dynamically add these
port types to the list of multicast ports based on multicast traffic.
Examples — The following example changes the multicast router
solicitation interval to 60 seconds:
WX1200# set igmp mrsol mrsi 60
success: change accepted.
See Also
"set igmp mrsol" on page 357.
— VLAN name or number. If you do not specify a