Clear Port Preference - 3Com 3CRWX120695A Command Reference Manual

Wireless lan mobility system wireless lan switch and controller
Hide thumbs Also See for 3CRWX120695A:
Table of Contents

Advertisement

60
C
4: P
HAPTER
ORT
clear port
preference
C
OMMANDS
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command clears the names of ports 1
through 3:
WX4400# clear port 1-3 name
See Also
"display port status" on page 66
"set port name" on page 78
Resets a gigabit Ethernet port on a WX4400 to use the GBIC (fiber)
interface for the active link.
Syntax —
clear port preference port-list
port-list
the specified ports.
Defaults — When both the copper and fiber interfaces of a gigabit
Ethernet port are connected, the GBIC (fiber) interface is the active link.
The RJ-45 (copper) link is unused.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — This command applies only to the WX4400. This command
does not affect a link that is already active on the port.
Examples — The following command clears the preference set on port 2
on a WX4400 switch:
WX4400# clear port preference 2
See Also
"display port preference" on page 65
"set port preference" on page 80
— List of physical ports. MSS clears the preference on all

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3crwx440095a

Table of Contents