Display {Ap | Dap} Etherstats - 3Com 3CRWX120695A Command Reference Manual

240 C 9: M
HAPTER ANAGED
display {ap | dap}
etherstats
A P C
CCESS OINT OMMANDS
Table 46 Output for display ap counters (continued)
Field
TxMultiPkt
TxUniByte
TxMultiByte
RxPkt
RxByte
UndcrptPkt
UndcrptByte
PhyError
See Also
"display sessions network" on page 440
Displays Ethernet statistics for a MAP's Ethernet ports.
Syntax —
display {ap | dap} etherstats [port-list | dap-num]
— List of WX switch ports directly connected to the MAPs
port-list
for which to display counters.
— Number of a Distributed MAP for which to display
dap-num
counters.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command displays Ethernet statistics for the
Ethernet ports on Distributed MAP 1:
WX4400# display dap etherstats 1
DAP: 1
=================================
RxUnicast:
RxMulticast:
RxBroadcast:
RxGoodFrames:
RxAlignErrs:
Description
Number of multicast packets transmitted by the radio.
Number of unicast bytes transmitted by the radio.
Number of multicast bytes transmitted by the radio.
Number of packets received by the radio.
Number of bytes received by the radio.
Number of undecryptable packets received by the radio.
Number of undecryptable bytes received by the radio.
Number of packets received by the radio that contained
Physical layer (PHY) errors.
ether: 1
75432 TxGoodFrames:
18789 TxSingleColl:
8 TxLateColl:
94229 TxMaxColl:
0 TxMultiColl:
55210
32
0
0
47