3Com 3CRWX120695A Command Reference Manual page 67

WX1200# display port status
Port Name
===============================================================================
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
Examples — The following command displays information for all ports
on a WX1200 switch:
Admin Oper
up up
up up auto
up up auto
up down
up down
up down
up down
up down
Table 14 describes the fields in this display.
Table 14 Output for display port status
Field
Port
Name
Admin
Oper
Config
Actual
Type
Config Actual
auto 100/full
100/full
100/full
auto
auto
auto
auto
auto
Description
Port number.
Port name. If the port does not have a name, the
port number is listed.
Administrative status of the port:
up — The port is enabled.
down — The port is disabled.
Operational status of the port:
up — The port is operational.
down — The port is not operational.
Port speed configured on the port:
10 — 10 Mbps.
100 — 100 Mbps.
1000 — 1000 Mbps.
auto — The port sets its own speed.
Speed and operating mode in effect on the port.
Port type:
ap — MAP access point port
network — Network port
wa — Wired authentication port
display port status
Type Media
network 10/100BaseTx
ap 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx
67