Display Banner Motd - 3Com 3CRWX120695A Command Reference Manual

40 C 3: S
HAPTER YSTEM
display banner
motd
S C
ERVICE OMMANDS
— Resets the location of the WX switch to null.
location
— Resets the name of the WX switch to the default system
name
name, which is the model number.
Default — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To clear the location of the WX switch, type the following
command:
WX4400# clear system location
success: change accepted.
See Also
"display config" on page 470
"display system" on page 42
"set system contact" on page 51
"set system countrycode" on page 51
"set system ip-address" on page 53
"set system location" on page 54
Shows the banner that was configured with the set banner motd
command.
Syntax —

display banner motd

Default — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To show the banner with the message of the day, type the
following command:
WX4400# display banner motd
hello world