Set Timezone - 3Com 3CRWX120695A Command Reference Manual

set timezone

"display summertime" on page 129
"display timedate" on page 130
"display timezone" on page 131
"set summertime" on page 153
"set timezone" on page 157
Sets the number of hours, and optionally the number of minutes, that the
wireless LAN switch's real-time clock is offset from Coordinated Universal
Time (UTC). These values are also used by Network Time Protocol (NTP), if
it is enabled.
Syntax —
set timezone zone-name
— Time zone name of up to 32 alphabetic characters. You
zone-name
can use a standard name or any name you like.
(minus sign) — Minus time to indicate hours (and minutes) to be
-
subtracted from UTC. Otherwise, hours and minutes are added by
default.
— Number of hours to add or subtract from UTC.
hours
— Number of minutes to add or subtract from UTC.
minutes
Default — If this command is not used, then the default time zone is
UTC.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To set the time zone for Pacific Standard Time (PST), type
the following command:
WX1200# set timezone PST -8
Timezone is set to 'PST', offset from UTC is -8:0 hours.
See Also
"clear summertime" on page 115
"clear timezone" on page 116
"display summertime" on page 129
"display timedate" on page 130
set timezone
{ [ ]}
-hours minutes
157