delete
diag
"display" on page 507
"next" on page 511
Removes the currently active boot profile. (For information about boot
profiles, see "display" on page 507.)
Syntax —
delete
Defaults — None.
Access — Boot prompt.
History — Introduced in MSS Version 3.0.
Usage — When you type the delete command, the next-lower
numbered boot profile becomes the active profile. For example, if the
currently active profile is number 3, profile number 2 becomes active after
you type delete to delete profile 3. You cannot delete boot profile 0.
Examples — To remove the currently active boot profile, type the
following command:
boot> delete
BOOT Index:
BOOT TYPE:
DEVICE:
FILENAME:
FLAGS:
OPTIONS:
See Also
"change" on page 503
"create" on page 504
"display" on page 507
"next" on page 511
Accesses the diagnostic mode.
Syntax —
diag
1
c
boot1:
default
00000000
run=nos;boot=0
delete
505