3Com 3CRWX120695A Command Reference Manual page 87

Table 18 Wired Authentication Port Details
Port Parameter
VLAN membership
Spanning Tree
Protocol (STP)
802.1X
Port groups
IGMP snooping
Maximum user
sessions
Examples — The following command sets port 2 for a wired
authentication user:
WX1200# set port type wired-auth 2
success: change accepted
The following command sets port 7 for a wired authentication user and
subdivides the port into three virtual ports to support three simultaneous
user sessions:
WX1200# set port type wired-auth 7 1,2,3
success: change accepted
See Also
"clear port type" on page 61
"set port type ap" on page 82
Setting
Removed from all VLANs. You cannot assign an MAP access
port to a VLAN. MSS automatically assigns MAP access ports
to VLANs based on user traffic.
Not applicable
Uses authentication parameters configured for users.
Not applicable
Enabled as users are authenticated and join VLANs.
1 (one).
set port type wired-auth 87