Display Igmp Statistics - 3Com 3CRWX120695A Command Reference Manual

352 C 11: IGMP S
HAPTER
WX1200# display igmp receiver-table group 237.255.255.0/24
VLAN: red
Session
--------------- ---- --------------- ----------------- -----
237.255.255.2
237.255.255.119
VLAN: green
Session
--------------- ---- --------------- ----------------- -----
237.255.255.17
237.255.255.255
display igmp
statistics
C
NOOPING OMMANDS
The following command lists all receivers for multicast groups
237.255.255.1 through 237.255.255.255, in all VLANs:
Port Receiver-IP
2 10.10.20.19 00:02:04:06:09:0d
3 10.10.30.31 00:02:04:06:01:0b
Port Receiver-IP
1 10.10.40.41 00:02:06:08:02:0c
6 10.10.60.61 00:05:09:0c:0a:01
Table 68 describes the fields in this display.
Table 68 Output for display igmp receiver-table
Field
VLAN
Session
Port
Receiver-IP
Receiver-MAC
TTL
See Also
"set igmp receiver" on page 363
Shows IGMP statistics.
Syntax —
display igmp statistics [vlan vlan-id]
vlan vlan-id
VLAN, MSS displays IGMP statistics for all VLANs.
Receiver-MAC
Receiver-MAC
Description
VLAN that contains the multicast receiver ports. Ports are
listed separately for each VLAN.
IP address of the multicast group being received.
Physical port through which the WX can reach the
receiver.
IP address of the receiver.
MAC address of the receiver.
Number of seconds before this entry ages out if the WX
does not receive a group membership message from the
receiver. For static multicast receiver entries, the TTL value
is undef. Static multicast receiver entries do not age out.
— VLAN name or number. If you do not specify a
TTL
112
112
TTL
12
111