Set Dot1X Tx-Period - 3Com 3CRWX120695A Command Reference Manual

432 C 15: 802.1X M
HAPTER

set dot1x tx-period

C
ANAGEMENT OMMANDS
Syntax —
set dot1x timeout supplicant seconds
— Specify a value between 1 and 65,535.
seconds
Defaults — The default is 30 seconds.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — Type the following command to set the number of seconds
for authentication session timeout to 300:
WX4400# set dot1x timeout supplicant 300
success: dot1x supplicant timeout set to 300.
See Also
"display dot1x" on page 421
"clear dot1x timeout auth-server" on page 419
Sets the number of seconds that must elapse before the WX switch
retransmits an EAPoL packet.
Syntax —
set dot1x tx-period seconds
— Specify a value between 1 and 65,535.
seconds
Defaults — The default is 5 seconds.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — Type the following command to set the number of seconds
before the WX switch retransmits an EAPoL packet to 300:
WX4400# set dot1x tx-period 300
success: dot1x tx-period set to 300.
See Also
"display dot1x" on page 421
"clear dot1x tx-period" on page 420