Display Spantree - 3Com 3CRWX120695A Command Reference Manual

320 C 10: STP C
HAPTER

display spantree

WX1200# display spantree vlan default
VLAN 1
Spanning tree mode
Spanning tree type
Spanning tree enabled
Designated Root
Designated Root Priority
Designated Root Path Cost
Designated Root Port
Root Max Age
Bridge ID MAC ADDR
Bridge ID Priority
Bridge Max Age 20 sec
Port
------------------------------------------------------------------------------
1
2
3
4
5
6
OMMANDS
Displays STP configuration and port-state information.
Syntax —
display spantree
[port-list | vlan vlan-id] [active]
— List of ports. If you do not specify any ports, MSS
port-list
displays STP information for all ports.
vlan vlan-id
MSS displays STP information for all VLANs.
— Displays information for only the active (forwarding) ports.
active
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command displays STP information for VLAN
default:
PVST+
IEEE
00-02-4a-70-49-f7
32768
19
1
20 sec Hello Time 2 sec
00-0b-0e-02-76-f7
32768
Hello Time 2 sec
Vlan Port-State
1 Forwarding
1 Disabled
1 Disabled
1 Disabled
1 Disabled
1 Forwarding
— VLAN name or number. If you do not specify a VLAN,
Forward Delay 15 sec
Forward Delay 15 sec
Cost
19 128
19 128
19 128
19 128
19 128
19 128
Prio Portfast
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled