Set Rfdetect Log - 3Com 3CRWX120695A Command Reference Manual

462 C 17: RF D
HAPTER

set rfdetect log

C
ETECTION OMMANDS
Examples — The following command configures MSS to ignore BSSID
aa:bb:cc:11:22:33 during RF scans:
WX1200# set rfdetect ignore aa:bb:cc:11:22:33
success: MAC aa:bb:cc:11:22:33 is now ignored.
See Also
"clear rfdetect ignore" on page 451
"display rfdetect ignore" on page 455
Disables or reenables generation of log messages when rogues are
detected or when they disappear.
Syntax —
set rfdetect log {enable | disable}
— Enables logging of rogues.
enable
— Disables logging of rogues.
disable
Defaults — RF detection logging is enabled by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — This command is valid only on the seed switch of the Mobility
Domain.
The log messages for rogues are generated only on the seed and appear
only in the seed's log message buffer. Use the display log buffer
command to display the messages in the seed switch's log message
buffer.
Examples — The following command enables RF detection logging for
the Mobility Domain managed by this seed switch:
WX1200# set rfdetect log enable
success: rfdetect logging is enabled.
See Also
"display log buffer" on page 490