Set Gateway; Set Help - 3Com 3C780 - LinkBuilder FDDI Base Unit User Manual

C-4 Commands

set gateway

Syntax
set gateway ggg.ggg.ggg.ggg
Description
The set gateway command allows you to set the IP address (ggg.ggg.ggg.ggg)
for the default gateway.

set help

Syntax
set [help | ?]
Description
The set help command displays the options available for the set commands.
set ip
Syntax
set ipxxx.xxx.xxx.xxx [yyy.yyy.yyy.yyy][zzz.zzz.zzz.zzz]
When you enter the set boot filename command, you are prompted to enter
a filename for the software image, as shown below:
Enter filename?
When you enter the set boot server command, you are prompted to select a
boot server, as shown below:
Enter Servers IP address in dot notation?
When you select a boot method, enter a boot filename, or supply a server
address, your response is confirmed, as shown in the following example:
Boot parameters
Method : LOCAL
Server : 123.44.55.66
Filename : newimage