Fver - 3Com 3CRWX120695A Command Reference Manual

508 C 21: B
HAPTER OOT

fver

P C
ROMPT OMMANDS
Table 96 describes the fields in the display.
Table 96 Output of display command
Field
BOOT Index
BOOT TYPE
DEVICE
FILENAME
FLAGS
OPTIONS
See Also
"change" on page 503
"create" on page 504
"delete" on page 505
"next" on page 511
Displays the version of a system image file installed in a specific location
on a WX switch.
Syntax —
fver {c: | d: | e: | f: | boot0: | boot1:}
[filename]
— Nonvolatile storage area containing boot partition 0 (primary).
c:
Description
Boot profile slot, which can be a number from 0 to 3.
Boot type:
c — Compact flash. Boots using nonvolatile storage or a
flash card.
n — Network. Boots using a TFTP server.
Location of the system image file:
c: — Nonvolatile storage area containing boot partition 0
d: — Nonvolatile storage area containing boot partition 1
e: — Primary partition of the flash card in the flash card
slot
f: — Secondary partition of the flash card in the flash
card slot
boot0 — boot partition 0
boot1 — boot partition 1
System image file name.
Number representing the bit settings of boot flags to pass to
the booted system image.
String up to 128 bytes of boot options to pass to the booted
system image.