Display Dot1X - 3Com 3CRWX120695A Command Reference Manual

display dot1x

Defaults — The default is 5 seconds.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — Type the following command to reset the EAPoL
retransmission time:
WX4400# clear dot1x tx-period
success: change accepted.
See Also
"display dot1x" on page 421
"set dot1x tx-period" on page 432
Displays 802.1X client information for statistics and configuration
settings.
Syntax —
display dot1x {clients | stats | config}
— Displays information about active 802.1X clients,
clients
including client name, MAC address, and state.
— Displays global 802.1X statistics associated with connecting
stats
and authenticating.
— Displays a summary of the current configuration.
config
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
display dot1x 421