Set System Ip-Address - 3Com 3CRWX120695A Command Reference Manual

set system
ip-address
Table 8 Country Codes (continued)
Country
South Korea
Spain
Sweden
Switzerland
Taiwan
Thailand
United Arab Emirates
United Kingdom
United States
Default — The factory default country code is None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — You must set the system county code to a valid value before
using any set ap commands to configure a MAP.
Examples — To set the country code to Canada, type the following
command:
WX1200# set system country code CA
success: change accepted.
See Also
"display config" on page 470
Sets the system IP address so that it can be used by various services in the
WX switch.
CAUTION: Any currently configured Mobility Domain operations cease if
you change the IP address. If you change the address, you must reset the
Mobility Domain.
Syntax —
set system ip-address ip-addr
— IP address, in dotted decimal notation.
ip-addr
Code
KR
ES
SE
CH
TW
TH
AE
GB
US

set system ip-address

53