Clear Vlan - 3Com 3CRWX120695A Command Reference Manual

clear vlan

The following command clears all dynamic forwarding database entries
that match all VLANs:
WX4400# clear fdb dynamic
success: change accepted.
The following command clears all dynamic forwarding database entries
that match ports 3 and 5:
WX4400# clear fdb port 3,5
success: change accepted.
See Also
"display fdb" on page 92
"set fdb" on page 101
Removes physical or virtual ports from a VLAN or removes a VLAN
entirely.
When
CAUTION: you remove a VLAN, MSS completely removes the
VLAN from the configuration and also removes all configuration
information that uses the VLAN. If you want to remove only a specific
port from the VLAN, make sure you specify the port number in the
command.
Syntax —
clear vlan vlan-id [port port-list [tag tag-value]]
— VLAN name or number.
vlan-id
port — List of physical ports. MSS removes the specified
port-list
ports from the VLAN. If you do not specify a list of ports, MSS removes
the VLAN entirely.
tag — Tag number that identifies a virtual port. MSS
tag-value
removes only the specified virtual port from the specified physical
ports.
Default — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
clear vlan 91