Set Dot1X Timeout Auth-Server; Set Dot1X Timeout Supplicant - 3Com 3CRWX120695A Command Reference Manual

set dot1x timeout
auth-server
set dot1x timeout
supplicant
Defaults — The default is 3600 seconds (1 hour).
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — Type the following command to set the number of seconds
to 100 before reauthentication is attempted:
WX4400# set dot1x reauth-period 100
success: dot1x auth-server timeout set to 100.
See Also
"display dot1x" on page 421
"clear dot1x reauth-period" on page 419
Sets the number of seconds that must elapse before the WX switch times
out a request to a RADIUS authentication server.
Syntax —
set dot1x timeout auth-server seconds
— Specify a value between 1 and 65,535.
seconds
Defaults — The default is 30 seconds.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — Type the following command to set the authentication
server timeout to 60 seconds:
WX4400# set dot1x timeout auth-server 60
success: dot1x auth-server timeout set to 60.
See Also
"display dot1x" on page 421
"clear dot1x timeout auth-server" on page 419
Sets the number of seconds that must elapse before the WX switch times
out an authentication session with a supplicant (client).

set dot1x timeout auth-server

431