Set Dot1X Reauth-Max; Set Dot1X Reauth-Period - 3Com 3CRWX120695A Command Reference Manual

Wireless lan mobility system wireless lan switch and controller
Hide thumbs Also See for 3CRWX120695A:
Table of Contents

Advertisement

430
C
15: 802.1X M
HAPTER
set dot1x
reauth-max
set dot1x
reauth-period
C
ANAGEMENT
OMMANDS
See Also
"display dot1x" on page 421
"set dot1x reauth-max" on page 430
"set dot1x reauth-period" on page 430
Sets the number of reauthentication attempts that the WX switch makes
before the supplicant (client) becomes unauthorized.
Syntax —
set dot1x reauth-max number-of-attempts
number-of-attempts
Defaults — The default number of reauthentication attempts is 2.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — If the number of reauthentications for a wired authentication
client is greater than the maximum number of reauthentications allowed,
MSS sends an EAP failure packet to the client and removes the client from
the network. However, MSS does not remove a wireless client from the
network under these circumstances.
Examples — Type the following command to set the number of
authentication attempts to 8:
WX4400# set dot1x reauth-max 8
success: dot1x max reauth set to 8.
See Also
"display dot1x" on page 421
"clear dot1x reauth-max" on page 418
Sets the number of seconds that must elapse before the WX switch
attempts reauthentication.
Syntax —
set dot1x reauth-period seconds
— Specify a value between 60 (1 minute) and 1,641,600
seconds
(19 days).
— Specify a value between 1 and 10.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3CRWX120695A and is the answer not in the manual?

This manual is also suitable for:

3crwx440095a

Table of Contents