Clear {Ap | Dap} Radio - 3Com 3CRWX120695A Command Reference Manual

232 C 9: M
HAPTER ANAGED
clear {ap | dap}
radio
A P C
CCESS OINT OMMANDS
Disables an MAP radio and resets it to its factory default settings.
Syntax —
clear {ap port-list |
all}
— List of ports connected to the MAP access point(s) on
ap port-list
which to reset a radio.
— Number of a Distributed MAP on which to reset a
dap dap-num
radio.
— Radio 1 of the MAP.
radio 1
— Radio 2 of the MAP. (This option does not apply to
radio 2
single-radio models.)
— All radios on the MAP.
radio all
Defaults — The clear ap radio command resets the radio to the default
settings listed in Table 44 and in Table 57 on page 287.
Table 44 Radio-Specific Parameters
Parameter
channel
tx-power
antennatype
Access — Enabled
History — Introduced in MSS Version 3.0.
Usage — When you clear a radio, MSS performs the following actions:
Clears the transmit power, channel, and external antenna setting from
the radio.
dap
Default Value
802.11b — 6
802.11a — Lowest
valid channel number
for the country of
operation
Highest setting allowed for
the country of operation
or highest setting
supported on the
hardware, whichever is
lower.
ANT1180
dap-num } radio {1 | 2 |
Description
Number of the channel in
which a radio transmits and
receives traffic
Transmit power of a radio, in
decibels referred to
1 milliwatt (dBm)
External antenna model