3Com 3CRWX120695A Command Reference Manual page 122

122 C 6: IP S
HAPTER ERVICES
C
OMMANDS
Examples — The following command shows the status and port number
for the HTTPS management interface to the WX switch:
WX4400# display ip https
HTTPS is enabled
HTTPS is set to use port 443
Last 10 Connections:
IP Address
------------
10.10.10.56
Table 30 describes the fields in this display.
Table 30 Output for display ip https
Field
HTTPS is
enabled/disabled
HTTPS is set to use port TCP port number on which the WX switch listens for
Last 10 connections
IP Address
Last Connected
Time Ago (s)
See Also
"clear ip telnet" on page 112
"display ip telnet" on page 125
"set ip https server" on page 139
"set ip telnet" on page 146
"set ip telnet server" on page 146
Last Connected
----------------------- ------------
2003/05/09 15:51:26 pst
Description
State of the HTTPS server:
Enabled
Disabled
HTTPS connections.
List of the last 10 devices to establish connections to
the WX switch's HTTPS server.
IP address of the device that established the
connection.
If a browser connects to a WX switch from behind a
proxy, then only the proxy IP address is shown. If
multiple browsers connect using the same proxy, the
proxy address appears only once in the output.
Time when the WX switch established the HTTPS
connection to the WX switch.
Number of seconds since the device established the
HTTPS connection to the WX switch.
Time Ago (s)
349