Display Port Counters - 3Com 3CRWX120695A Command Reference Manual

62 C 4: P
HAPTER ORT
display port
counters
C
OMMANDS
Examples — The following command clears port 5:
WX1200# clear port type 5
This may disrupt currently authenticated users.
Are you sure? (y/n) [n]y
success: change accepted.
See Also
"set port type ap" on page 82
"set port type wired-auth" on page 86
Displays port statistics.
Syntax —

display port counters

[octets | packets | receive-errors | transmit-errors |
collisions | receive-etherstats
transmit-etherstats] [port port-list]
— Shows octet statistics.
octets
— Shows packet statistics.
packets
receive-errors
transmit-errors
collisions
receive-etherstats
packets.
transmit-etherstats
packets.
port port-list
list, MSS shows statistics for all ports.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Usage — You can specify one statistic type with the command.
— Shows errors in received packets.
— Shows errors in transmitted packets.
— Shows collision statistics.
— Shows Ethernet statistics for received
— Shows Ethernet statistics for transmitted
— List of physical ports. If you do not specify a port
|