Display Spantree Portvlancost; Display Spantree Statistics - 3Com 3CRWX120695A Command Reference Manual

display spantree
portvlancost
display spantree
statistics
Shows the cost of a port on a path to the STP root bridge, for each of the
port's VLANs.
Syntax —
display spantree portvlancost port-list
— List of ports.
port-list
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command shows the STP port cost of port 1:
WX4400# display spantree portvlancost 1
port 1 VLAN 1 have path cost 19
See Also
"clear spantree portcost" on page 316
"clear spantree portvlancost" on page 317
"display spantree" on page 320
"set spantree portcost" on page 336
"set spantree portvlancost" on page 338
Displays STP statistics for one or more WX network ports.
Syntax —

display spantree statistics

[port-list [vlan vlan-id]]
— List of ports. If you do not specify any ports, MSS
port-list
displays STP statistics for all ports.
— VLAN name or number. If you do not specify a VLAN,
vlan vlan-id
MSS displays STP statistics for all VLANs.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.

display spantree portvlancost

325