3Com 3CRWX120695A Command Reference Manual page 424

424 C 15: 802.1X M
HAPTER
C
ANAGEMENT OMMANDS
Type the following command to display 802.1X statistics:
WX4400# display dot1x stats
802.1X statistic
----------------
Enters Connecting:
Logoffs While Connecting:
Enters Authenticating:
Success While Authenticating:
Timeouts While Authenticating:
Failures While Authenticating:
Reauths While Authenticating:
Starts While Authenticating:
Logoffs While Authenticating:
Starts While Authenticated:
Logoffs While Authenticated:
Bad Packets Received:
Table 77 explains the counters in the display dot1x stats output.
Table 77 display dot1x stats Output
Field
Enters Connecting
Logoffs While
Connecting
Enters Authenticating Number of times that the state wildcard transitions.
Success While
Authenticating
Timeouts While
Authenticating
Failures While
Authenticating
Reauths While
Authenticating
Starts While
Authenticating
Description
Number of times that the WX switch state transitions to the
CONNECTING state from any other state.
Number of times that the WX switch state transitions from
CONNECTING to DISCONNECTED as a result of receiving an
EAPoL-Logoff message.
Number of times the WX switch state transitions from
AUTHENTICATING from AUTHENTICATED, as a result of an
EAP-Response/Identity message being received from the
supplicant (client).
Number of times that the WX switch state wildcard
transitions from AUTHENTICATING to ABORTING.
Number of times that the WX switch state wildcard
transitions from AUTHENTICATION to HELD.
Number of times that the WX switch state wildcard
transitions from AUTHENTICATING to ABORTING, as a result
of a reauthentication request (reAuthenticate = TRUE).
Number of times that the WX switch state wildcard
transitions from AUTHENTICATING to ABORTING, as a result
of an EAPoL-Start message being received from the
Supplicant (client).
value
-----
709
112
467
0
52
0
0
31
0
85
1
0