Set Igmp Rv - 3Com 3CRWX120695A Command Reference Manual

364 C 11: IGMP S
HAPTER

set igmp rv

C
NOOPING OMMANDS
See Also
"display igmp receiver-table" on page 351
Changes the robustness value for one VLAN or all VLANs on a WX.
Robustness adjusts the IGMP timers to the amount of traffic loss that
occurs on the network.
Syntax —
set igmp rv num [vlan vlan-id]
— Robustness value. You can specify a value from 2 through 255.
num
Set the robustness value higher to adjust for more traffic loss.
vlan vlan-id
VLAN, MSS changes the robustness value for all VLANs.
Defaults — The default robustness value for all VLANs is 2.
Access — Enabled.
History — Introduced in MSS Version 3.0.
See Also
"set igmp oqi" on page 359
"set igmp qi" on page 360
"set igmp qri" on page 361
— VLAN name or number. If you do not specify a