3Com 3CRWX120695A Command Reference Manual page 471

ntp
portconfig
portgroup
radio-profile
rfdevice
service-profile
sm
snmp
spantree
system
trace
vlan
vlan-fdb
If you do not specify a configuration area, nondefault information for
all areas is displayed.
— Includes configuration items that are set to their default values.
all
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — If you do not use one of the optional parameters, configuration
commands that set nondefault values are displayed for all configuration
areas. If you specify an area, commands are displayed for that area only. If
you use the all option, the display also includes commands for
configuration items that are set to their default values.
Examples — The following command shows configuration information
for VLANs:
WX4400# display config area vlan
# Configuration nvgen'd at 2004-5-21 19:36:48
# Image 3.0.0
# Model WX4400
# Last change occurred at 2004-5-21 18:20:50
set vlan 1 port 1
display config 471