Display Roaming Station - 3Com 3CRWX120695A Command Reference Manual

96 C 5: VLAN C
HAPTER
display roaming
station
WX4400# display roaming station
User Name
----------------------- --------------- ----------------- -------------- ------
redsqa
OMMANDS
The following command lists the number of dynamic entries that the
forwarding database contains:
WX1200# display fdb count dynamic
Total Matching Entries = 2
See Also
"display fdb" on page 92
Shows a list of the stations roaming to the wireless LAN switch through a
VLAN tunnel.
Syntax —

display roaming station

[vlan vlan-id] [peer
vlan vlan-id
peer ip-addr
this peer WX switch in the Mobility Domain.
Default — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — The output displays roaming stations within the previous 1
second.
Examples — To display all stations roaming to the WX switch, type the
following command:
Station IP Addr Old AP MAC
0.0.0.0
ip-addr
]
— Output is restricted to stations using this VLAN.
— Output is restricted to stations tunnelling through
00:00:00:00:00:00 violet
VLAN State
Up