318
C
10: STP C
HAPTER
clear spantree
portvlanpri
OMMANDS
vlan vlan-id
the specified VLAN.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — MSS does not change a port's cost for VLANs other than the
one(s) you specify.
Examples — The following command resets the STP cost for port 2 in
VLAN sunflower:
WX4400# clear spantree portvlancost 2 vlan sunflower
success: change accepted.
See Also
"clear spantree portcost" on page 316
"display spantree" on page 320
"display spantree portvlancost" on page 325
"set spantree portcost" on page 336
"set spantree portvlancost" on page 338
Resets to the default value the priority of a network port or ports for
selection as part of the path to the STP root bridge, on one VLAN or all
VLANs.
Syntax —
clear spantree portvlanpri port-list {all | vlan
vlan-id}
— List of ports. The port priority is reset to 32 (the default)
port-list
on the specified ports.
— Resets the priority for all VLANs.
all
vlan vlan-id
only the specified VLAN.
Defaults — None.
Access — Enabled.
— VLAN name or number. MSS resets the cost for only
— VLAN name or number. MSS resets the priority for