Traceroute - 3Com 3CRWX120695A Command Reference Manual

WX1200-remote> display vlan
VLAN Name
---- ---------------- ------ ----- ----- ---------------- ----- -----
1 default
3 red
10 backbone

traceroute

Admin VLAN Tunl
Status State Affin Port
Up Up
Up Up
Up Up
When the administrator presses Ctrl+t to end the Telnet connection, the
management session returns to the local prompt:
WX1200-remote> Session 0 pty tty2.d terminated tt name tty2.d
WX1200#
See Also
"clear sessions" on page 435
"display sessions" on page 438
Traces the route to an IP host.
Syntax —
traceroute host [dnf] [no-dns] [port port-num]
[queries num] [size size] [ttl hops] [wait ms]
— IP address, hostname, or alias of the destination host. Specify
host
the IP address in dotted decimal notation.
— Sets the Do Not Fragment bit in the ping packet to prevent the
dnf
packet from being fragmented.
— Prevents MSS from performing a DNS lookup for each hop
no-dns
to the destination host.
— TCP port number listening for the traceroute
port port-num
probes.
— Number of probes per hop.
queries num
— Probe packet size in bytes. You can specify from 40
size size
through 1,460.
5
3
5
5
1
2
traceroute
Port
Tag State
none Up
none Up
none Up
159