Reset System - 3Com 3CRWX120695A Command Reference Manual

476 C 18: F
HAPTER ILE
WX4400# mkdir corp2
success: change accepted.
WX4400# dir
===============================================================================
file:
Filename
file:configuration
file:configuration.txt
corp2/
corp_a/
file:dangcfg
dangdir/
old/
Total:
===============================================================================
Boot:
Filename
*boot0:bload
*boot0:WXA03002.Rel
boot1:WXA03001.Rel
Boot0: Total:
Boot1: Total:
===============================================================================
temporary files:
Filename
Total:

reset system

M C
ANAGEMENT OMMANDS
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following commands create a subdirectory called corp2
and display the root directory to verify the result:
33 Kbytes used, 207822 Kbytes free
8928 Kbytes used, 3312 Kbytes free
8197 Kbytes used, 4060 Kbytes free
0 bytes used, 93537 Kbytes free
See Also
"dir" on page 467
"rmdir" on page 477
Restarts an WX switch and reboots the software.
Syntax —
reset system [force]
— Immediately restarts the system and reboots, without
force
comparing the running configuration to the configuration file.
Size
17 KB
379 bytes
512 bytes
512 bytes
13 KB
512 bytes
512 bytes
Size
746 KB
8182 KB May 09 2004, 18:58:16
8197 KB May 21 2004, 18:01:02
Size
Created
May 21 2004, 18:20:53
May 09 2004, 18:55:17
May 21 2004, 19:22:09
May 21 2004, 19:15:48
May 16 2004, 18:30:44
May 16 2004, 17:23:44
Sep 23 2003, 21:58:48
Created
May 09 2004, 19:02:16
Created