Obtaining Help; Further Information - 3Com 5500-SI Quick Reference Manual

Displaying Command Parameters
At the prompt, enter the name of the command followed by a space and
<sw5500-xx>
boot ?
The following parameters are displayed:
attribute-switch
boot-loader
bootrom
web-package
To specify boot loader, enter the command as follows:
<sw5500-xx>
boot boot-loader ?
You only need to enter ? if parameters exist for the command.
Displaying Parent Menus
At the prompt, enter
quit
Displaying the User View Menu
Press <CTRL-Z>.

Obtaining Help

At the prompt, enter .
?

Further Information

For further information about how to use the command line interface, refer to the Command Reference Guide and
the Configuration Guide, which are both available as PDF documents on the CD that accompanied the unit.
Commands
abr-summary
Use the
abr-summary
access-limit
Use the
access-limit
accounting
Use the
accounting
accounting domain
Use the
accounting domain
accounting-on enable
Use the
accounting-on enable
accounting optional
Use the
accounting optional
Exchange the file main-attribute and backup-attribute.
Select a file to boot at the next time
Update Bootrom
Set web resource package
.
command to configure route aggregation on the area border router.
command to configure a limit to the amount of supplicants in the current ISP domain.
command to configure an accounting scheme for the current ISP domain.
command to enable the DHCP accounting function.
command to enable user re-authentication at reboot.
command to enable the selection of the RADIUS accounting option.
3Com Switch 5500 Family
Quick Reference Guide
. For example:
?
DHCP Address Pool view
OSPF Area view
ISP Domain view
ISP Domain view
RADIUS Scheme view
ISP Domain view