Commands; Commands By Usage - 3Com 3CRWX120695A Command Reference Manual

6
Commands by
Usage
IP S
ERVICES
Use IP services commands to configure and manage IP interfaces,
management services, the Domain Name Service (DNS), Network Time
Protocol (NTP), and aliases, and to ping a host or trace a route.
This chapter presents IP services commands alphabetically. Use Table 25
to locate commands in this chapter based on their use.
Table 25 IP Services Commands by Usage
Type
IP Interface
System IP Address
IP Route
SSH Management
Telnet Management "set ip telnet" on page 146
C
OMMANDS
Command
"set interface" on page 135
"set interface status" on page 136
"display interface" on page 118
"clear interface" on page 109
"set system ip-address" on page 155
"clear system ip-address" on page 115
"set ip route" on page 140
"display ip route" on page 123
"clear ip route" on page 111
"set ip ssh server" on page 145
"set ip ssh" on page 143
"set ip ssh idle-timeout" on page 144
"set ip ssh absolute-timeout" on page 143
"set ip telnet server" on page 146
"display ip telnet" on page 125
"clear ip telnet" on page 112