Display Port-Group - 3Com 3CRWX120695A Command Reference Manual

WX1200> display port counters octets port 3
Port Status
=============================================================================
3 Up

display port-group

Examples — The following command shows octet statistics for port 3:
Rx Octets
27965420
This command's output has the same fields as the monitor port
counters command. For descriptions of the fields, see Table 16 on
page 70.
See Also
"clear port counters" on page 58
"monitor port counters" on page 68
Shows port group information.
Syntax —
display port-group [all | name group-name]
— Shows information for all port groups.
all
name group-name
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command displays the configuration of port
group server2:
WX1200# display port-group name server2
Port group: server2 is up
Ports: 5, 7
Table 11 describes the fields in the display port-group output.
Table 11 Output for display port-group
Field
Port group
Ports
— Shows information for the specified port group.
Description
Name and state (enabled or disabled) of the port
group.
Ports contained in the port group.
display port-group 63
Tx Octets
34886544