Display Summertime - 3Com 3CRWX120695A Command Reference Manual

display
summertime
Table 34 Output of display snmp configuration
Field Description
Snmp agent is State of the SNMP agent on the WX switch:
System Name String configured by the set system name command.
System location String configured by the set system location command.
System contact String configured by the set system contact command.
System description WX switch model.
Trap Receiver IP address of each trap receiver.
Trap Name SNMP traps supported by MSS.
Enabled State of each trap:
Community Access Type of access for an SNMP community.
See Also
"set ip snmp server" on page 142
"set port trap" on page 81
"set snmp community" on page 149
"set snmp trap" on page 150
"set snmp trap receiver" on page 153
"set system contact" on page 51
"set system location" on page 54
"set system name" on page 55
Shows a wireless LAN switch's offset from its real-time clock.
Syntax —

display summertime

Default — There is no summertime offset by default.
Access — All.
History — Introduced in MSS Version 3.0.
Enabled
Disabled
Yes
No
display summertime 129