Set Dot1X Wep-Rekey; Set Dot1X Wep-Rekey-Period - 3Com 3CRWX120695A Command Reference Manual

set dot1x
wep-rekey
set dot1x
wep-rekey-period
Enables or disables Wired Equivalency Privacy (WEP) rekeying for
broadcast and multicast encryption keys.
Syntax —
set dot1X wep-rekey {enable | disable}
— Causes the broadcast and multicast keys for WEP to be
enable
rotated at an interval set by the set dot1x wep-rekey-period for each
radio, associated VLAN, and encryption type. The WX generates the
new broadcast and multicast keys and pushes the keys to the clients
via EAPoL key messages.
— WEP broadcast and multicast keys are never rotated.
disable
Defaults — WEP key rotation is enabled, by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — Reauthentication is not required for WEP key rotation to take
place. Broadcast and multicast keys are always rotated at the same time,
so all members of a given radio, VLAN, or encryption type receive the
new keys at the same time.
Examples — Type the following command to disable WEP key rotation:
WX4400# set dot1x wep-rekey disable
success: wep rekeying disabled
See Also
"display dot1x" on page 421
"set dot1x wep-rekey-period" on page 433
Sets the interval for rotating the WEP broadcast and multicast keys.
Syntax —
set dot1x wep-rekey-period seconds
— Specify a value between 30 and 1,641,600 (19 days).
seconds
Defaults — The default is 1800 seconds (30 minutes).
Access — Enabled.

set dot1x wep-rekey

433